** MOTOROLA Mobile Secret Codes **
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings 38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Msg Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.
The 54# Tip:
Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.
*#06# for checking the IMEI (International Mobile Equipment Identity)
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng Field Options’ function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.
What’s the use of RBS:
Get Distance From Base Station – Place a call, when it is answered, press [MENU] until ‘Eng Field Option’ is displayed, press [OK], select ‘Active Cell’, press [OK], press [MENU] until ‘Time Adv xxx’ appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality – press [MENU] until ‘Eng Field Option’ is displayed, press [OK], select ‘Active Cell’, press [OK], press [MENU] until ‘C1’ appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Note: The author does not take any responsibility for your actions and not responsible for any damage caused by this tutorial.
Comments
Powered by Facebook Comments